Aspire Feedlink Mod
Aspire Feedlink Mod
The Feedlink Mod from Aspire is a single 18650 squonk box mod that is compatible with all types of squonk tanks. Easy to use, 5 clicks on and off functionality, and bypass mode operation. Now it's more convenient than ever to use your squonk device. Available in multiple fashionable choices, all with a very comfortable 'pistol grip' that fits snugly in either your left or right hand.
Specifications & Dimensions:
Height: 87mm
Width: 48mm
Thickness: 30mm
Silicone Bottle Capacity: 7mL
Output Voltage: 3.0V-4.2V
FEEDLINK DESIGN - The 'pistol grip' mod, including the tank, is ergonomically styled and fits snugly in the hand with easy use with left or right hand.
FILLING THE SQUONK BOTTLE - This is simplicity itself, just an anti-clockwise turn of the bottle retaining screw with release the bottle carrier and the bottle. Remove the bottle from the carrier, unscrew the metal top-cap and feeder tube and fill with your favorite e-liquid. Replace the top-cap/feeder tube, reinsert into the carrier and replace into the mod, remembering to replace and tighten the bottle retaining screw.
BATTERY INSTALLATION - Similar to the squonk bottle removal/refilling, just unscrew the battery cap in the base of the mod, insert a fresh 18650 battery, positive post upper most towards the top of the mod, replace the screw-in battery cap firmly and the mod is ready to use.
EASY SQUEEZE & FILL - To fill or top up the tank, gently squeeze the squonk bottle until you can see your e-liquid rising into the tank, squeeze again to fill the tank to your requirements but don’t try to overfill, remember you can top up easily with just another gentle squeeze or two.
Box Contents:
1* Feedlink mod / 2* O-Rings / 1* Warning card / 1* User manual / 1* Warranty card