Hohm Grown 2 26650 4244mAh 3.6V Li-NMC Battery (Single)
Hohm Grown 2 26650 4244mAh 3.6V Li-NMC Battery (Single)
Extraordinary choice for those that want serious punch in the 26650 world, without forfeiting capacity. With it’s QSP Li-NMC formula, these are officially rated at 4244mAh, with a CDR of 30.3A, and 80°C | 2.8V cut-off limit (whichever occurs first) at 41.1A. All ratings are subject to meet and/or exceed strict limitation policies set forth for DLr1, TID2, PVDL3, CLR4, mΩR5, and Temperature (°C). Hohm GROWN is based off the QSP format, with chemistry unity process now at a slower mHz (megahertz) to keep costs down while achieving unprecedented capabilities.
Every Hohm Tech cell model has been tested and certified by the rightful authorities/laboratories and accredited entities to achieve certification of MSDS, CE, ROHS, UN38.3, Specifications, Air/Sea Transport, and PLI. We do not cut corners. We deliver what we promise… chart topping performance, capacity, consistency, and safety.
Specifications:
- Capacity: 4244mAh
- Max Charge Rate: 5.30A
- Continuous Discharge Rate: 30.3A
- Max@80°C | 2.8V cut-off: 41.1A
- Cycle Life Retention: 500 Cycles (81%), 1000 (73%)
- Chemistry Type: QSP Li-NMC
WARNINGS:
KEEP OUT out of reach of children and pets.
DO NOT store or carry batteries unprotected.
DO NOT use lower resistance (Ω) # OR exceed any cell limitation as indicated on cell.
DO NOT use in device that allows batteries to touch that are facing opposing directions (risk severe burn injury and explosion).
DO NOT install, use, or charge backwards or improper configuration.
DO NOT use a battery that has ANY dents, tears, punctures, or any other damage at all to its structure or outer label wrapping (risk severe burn injury). Inspect each battery carefully before use. This ensures safe, reliable, consistent operation, and functionality.
DO NOT use if hot to touch. Risk severe burn injury and explosion.
DO NOT charge over 4.2v or discharge below specified cut-off volts.
Lithium ion batteries have inherent risks that can cause severe burn injury, fire, explosion, and battery failure if not handled and used in accordance to an application’s power requirements and/or within the battery capabilities. Read specification sheets’ cautions, warnings, and prohibitions (available in Download Center of this site).