Aspire Feedlink Revvo Kit

Aspire Feedlink Revvo Kit

Aspire is proud to announce the Feedlink Revvo Kit, an all new Aspire squonk mod with a slightly redesigned Revvo Boost Tank. Yes, it’s still the same out of this world Revvo tank with the awesome, innovative ARC coil but now coupled with a squonk mod, the Feedlink. The Feedlink is a single 18650 battery bypass firing mod with all the quality and safety features you have come to expect from Aspire. It’s almost pistol grip feel makes it very ergonomic in the hand and easy to operate the squonk bottle and fire button with just one hand, an absolute joy to hold and use. In addition to the Feedlink mod there is the newly designed bottom feeding Revvo Boost Tank. Aspire had already broken the mold for a tank with its new, flat Radial coil, and now it’s even easier to fill with a bottom feeding squonk pin! Who needs any more capacity when just a squeeze of the squonk bottle will top up your tank, you don’t even have to put it down.

Specifications & Dimensions:

Height: 124mm 

Width: 48mm

Thickness: 30mm

Tank Capacity: 2mL

Silicone Bottle Capacity: 7mL

Output Voltage: 3.0V-4.2V

FEEDLINK REVVO DESIGN - The 'pistol grip' mod, including the tank, is ergonomically styled and fits snugly in the hand with easy use with left or right hand.

REVVO BOOST TANK - The tank is simplicity itself to use. It has an ultra convenient bottom feed squonk pin system where you don't even have to open, unscrew, lift, or otherwise adjust for filling.

INNOVATIVE AND REVOLUTIONARY ASPIRE RADIAL COIL (ARC) - The Feedlink Revvo Kit still uses the same fantastic coil design, the ARC (Aspire Radial Coil). It still sits horizontally in the tank similar to a 'stove-top' design and of course, still has the increased surface area of the original coil for great flavor and great vapor production. It just fits in a tank that is now even easier to fill!

Coil Resistance: 0.1Ω-0.14Ω

Wattage Range: 70W-80W

REVVO TANK AIRFLOW - The tank has the same awesome adjustable airflow with three large air inlets and comes in a TPD compliant 2ml version with no need for a larger tank due to the squonk style bottom feed filling system,just squeeze the squonk bottle and it’s filled and ready to go again.

FILLING THE SQUONK BOTTLE - This is simplicity itself, just an anti-clockwise turn of the bottle retaining screw with release the bottle carrier and the bottle. Remove the bottle from the carrier, unscrew the metal top-cap and feeder tube and fill with your favorite e-liquid. Replace the top-cap/feeder tube, reinsert into the carrier and replace into the mod, remembering to replace and tighten the bottle retaining screw.

BATTERY INSTALLATION - Similar to the squonk bottle removal/refilling, just unscrew the battery cap in the base of the mod, insert a fresh 18650 battery, positive post upper most towards the top of the mod, replace the screw-in battery cap firmly and the mod is ready to use.

EASY SQUEEZE & FILL - To fill or top up the tank, gently squeeze the squonk bottle until you can see your e-liquid rising into the tank, squeeze again to fill the tank to your requirements but don’t try to overfill, remember you can top up easily with just another gentle squeeze or two. Once filled (just as with the original Revvo tank), if it’s a new coil or the coil has become dry for any reason, invert tank to saturate the coil before vaping.

Kit Contents:

1* Feedlink mod / 1* 2ml Revvo Boost tank / 2* Coils (0.10-0.14Ω) / 1* Glass tube /

11* O-rings / 2* Warning card / 1* User manual / 1* Warranty card